What kind of emergency lighting

What kind of emergency lighting Emergency lights are lights that can guide evacuation in emergency situations. They are guide lights that maintain the minimum energy of living rooms, workplaces, and evacuation routes. When the power is interrupted, the lighting device of the light source can continue to be provided.

The types of guided lights are:

1. Export signage light: The fire safety regulations just above the safety door or above the fire door in the fire prevention area stipulate the use of green as the base and the white font as the main.

2. Direction indicators for evacuation: Use at corridor corners, stairways, auditoriums, etc.

Emergency lighting type

General emergency lighting:

Bulb Type—Light Bulb Size 3W*2; Lighting Time: Two hours or more per lamp/ Four hours or more per lamp

Iron shell paint - bulb size 3W*2; shell material is iron, more durable but heavier

PL emergency lighting:

Lamp size: PL13W / use more than four hours / ABS

Fireproof material: It uses reinforced plastic, so it has more changes in lighter appearance. It is a double bulb design but it can also be used as a single bulb.

The Other is a sub-mother-type lamp, which combines a PL lamp and a double lamp in one body. The brightness is larger, and the adjustable angle is also larger than the normal one. The part of the PL lamp can be used as a flashlight.

Embedded emergency lighting:

Straight PL/horizontal PL:PL13W Lighting time: 4 hours or more

Emergency lighting maintenance

General inspection: Check whether there is any deformation, peeling off or stained condition, and confirm whether the items outside the emergency lighting have any hindrance to illumination.

The emergency lighting inspection inspection cycle shall be checked at least once every six months to ensure that the function is normal.

Test method: Unplug the power cord or press the check button. If the lamp does not light, replace the lamp.

A Battery Charger supplies current to the base plate. Once the AGV is in charging position and the collector has made contact with the base plate, the AGV computer turns on the current.

The base plate has chamfered entry/exit ramps to facilitate smooth drive-on/drive-off of the spring loaded collector. 

Battery charging stations may be installed anywhere within the system where the production process allows the AGV to stop (staging areas, turn arounds, loading stops etc.). 

2 Phase Charging Contacts

2 Phase Battery Charging Contacts,2 Phase 200A Charging Contacts,200A Battery Charging Contact,2 Phase Charging Contacts

Xinxiang Taihang Jiaxin Electric Tech Co., Ltd , https://www.agvchargers.com